LCP Standard

Designed to be installed next to an 80” high by 40”/48” deep TS8 server cabinet, the LCP Standard can accommodate up to three air/water exchanger modules that can be hotswapped if needed. When fully loaded with three air/water exchanger modules the LCP Standard can provide up to 68,243 BTU (20KW) of useful cooling with a maximum air volume of 1766 cfm. Don’t have an immediate need for that much heat removal? Start with one exchanger module then add more as needed.

LCP Plus

Using the same footprint and basic design as the Standard, the LCP Plus includes six fan modules that work in concert with the included heat exchanger to increase the useful cooling capacity to 95,540 BTU (28 kW). The LCP Plus is designed for cabinets 80” high by 48” deep and has a maximum air volume of 2825 cfm. The LCP Plus (and LCP Standard) can be bayed to a single cabinet or between two enclosures. It is also possible to put a pair of LCPs on either side of especially hot cabinets for applications where extreme heat loads are present.

LCP Extend

Ideal for retrofitting, the LCP Extend is installed on the rear door of problem racks. The LCP Extend can be ordered for use on cabinets from other manufacturers. Already using Rittal cabinets? The unit comes mounted into the proper replacement rear door - just swap it out.

Freestanding Chillers

With an output range from 32 kW to 172 kW to satisfy the demands of high cooling load applications, Rittal freestanding chillers are up to the largest task. Servicing is also easy with removable panels for quick access